Towards Power FPGA: Architecture, Modeling and Control of Multiport Power Converters

Ping Wang; Minjie Chen

doi:10.1109/COMPEL.2018.8460019

Towards Power FPGA: Architecture, Modeling and Control of Multiport Power Converters

Ping Wang, Minjie Chen

Research output: Chapter in Book/Conference Proceeding/Report › Conference Paper published in a book › peer-review

25 Citations (Scopus)

Abstract

Multiport power converters are needed in a wide range of applications including battery management systems, data center power delivery, and renewable energy systems. These systems comprise numerous distributed and modular power conversion cells with sophisticated and bidirectional power flow. This paper systematically investigates the architecture, modeling and control of multiport power converters with a large number of ports, and explores the theoretical foundation of an emerging 'Power FPGA' concept - Flexible, Programmable, Granular and Adaptive power electronics - that will enable a wide range of exciting applications. We classified multiport power converters into two major categories, and developed a software tool based on Newton-Raphson method to rapidly identify the control strategy. We analyzed the applicability and limitations of this control framework, and simulated a 100-port energy converter with programmable power flow. A four-port programmable energy converter is built and tested to experimentally validate the proposed modeling and control strategy.

Original language	English
Title of host publication	2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018
Publisher	Institute of Electrical and Electronics Engineers Inc.
Number of pages	8
ISBN (Electronic)	9781538655412
ISBN (Print)	9781538655429
DOIs	https://doi.org/10.1109/COMPEL.2018.8460019
Publication status	Published - 13 Sept 2018
Externally published	Yes
Event	19th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2018 - Padova, Italy Duration: 25 Jun 2018 → 28 Jun 2018

Publication series

Name	2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018

Conference

Conference	19th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2018
Country/Territory	Italy
City	Padova
Period	25/06/18 → 28/06/18

Bibliographical note

Publisher Copyright:
© 2018 IEEE.

Keywords

multiport power converter
energy router
power flow calculation
Power FPGA

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/COMPEL.2018.8460019

Cite this

Wang, P., & Chen, M. (2018). Towards Power FPGA: Architecture, Modeling and Control of Multiport Power Converters. In 2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018 Article 8460019 (2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/COMPEL.2018.8460019

@inproceedings{684f160ba78345f78fdb3e747a917ff5,

title = "Towards Power FPGA: Architecture, Modeling and Control of Multiport Power Converters",

abstract = "Multiport power converters are needed in a wide range of applications including battery management systems, data center power delivery, and renewable energy systems. These systems comprise numerous distributed and modular power conversion cells with sophisticated and bidirectional power flow. This paper systematically investigates the architecture, modeling and control of multiport power converters with a large number of ports, and explores the theoretical foundation of an emerging 'Power FPGA' concept - Flexible, Programmable, Granular and Adaptive power electronics - that will enable a wide range of exciting applications. We classified multiport power converters into two major categories, and developed a software tool based on Newton-Raphson method to rapidly identify the control strategy. We analyzed the applicability and limitations of this control framework, and simulated a 100-port energy converter with programmable power flow. A four-port programmable energy converter is built and tested to experimentally validate the proposed modeling and control strategy.",

keywords = "multiport power converter, energy router, power flow calculation, Power FPGA",

author = "Ping Wang and Minjie Chen",

note = "Publisher Copyright: {\textcopyright} 2018 IEEE.; 19th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2018 ; Conference date: 25-06-2018 Through 28-06-2018",

year = "2018",

month = sep,

day = "13",

doi = "10.1109/COMPEL.2018.8460019",

language = "English",

isbn = "9781538655429",

series = "2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018",

}

Wang, P & Chen, M 2018, Towards Power FPGA: Architecture, Modeling and Control of Multiport Power Converters. in 2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018., 8460019, 2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018, Institute of Electrical and Electronics Engineers Inc., 19th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2018, Padova, Italy, 25/06/18. https://doi.org/10.1109/COMPEL.2018.8460019

Towards Power FPGA: Architecture, Modeling and Control of Multiport Power Converters. / Wang, Ping; Chen, Minjie.
2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018. Institute of Electrical and Electronics Engineers Inc., 2018. 8460019 (2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018).

Research output: Chapter in Book/Conference Proceeding/Report › Conference Paper published in a book › peer-review

TY - GEN

T1 - Towards Power FPGA

T2 - 19th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2018

AU - Wang, Ping

AU - Chen, Minjie

PY - 2018/9/13

Y1 - 2018/9/13

N2 - Multiport power converters are needed in a wide range of applications including battery management systems, data center power delivery, and renewable energy systems. These systems comprise numerous distributed and modular power conversion cells with sophisticated and bidirectional power flow. This paper systematically investigates the architecture, modeling and control of multiport power converters with a large number of ports, and explores the theoretical foundation of an emerging 'Power FPGA' concept - Flexible, Programmable, Granular and Adaptive power electronics - that will enable a wide range of exciting applications. We classified multiport power converters into two major categories, and developed a software tool based on Newton-Raphson method to rapidly identify the control strategy. We analyzed the applicability and limitations of this control framework, and simulated a 100-port energy converter with programmable power flow. A four-port programmable energy converter is built and tested to experimentally validate the proposed modeling and control strategy.

AB - Multiport power converters are needed in a wide range of applications including battery management systems, data center power delivery, and renewable energy systems. These systems comprise numerous distributed and modular power conversion cells with sophisticated and bidirectional power flow. This paper systematically investigates the architecture, modeling and control of multiport power converters with a large number of ports, and explores the theoretical foundation of an emerging 'Power FPGA' concept - Flexible, Programmable, Granular and Adaptive power electronics - that will enable a wide range of exciting applications. We classified multiport power converters into two major categories, and developed a software tool based on Newton-Raphson method to rapidly identify the control strategy. We analyzed the applicability and limitations of this control framework, and simulated a 100-port energy converter with programmable power flow. A four-port programmable energy converter is built and tested to experimentally validate the proposed modeling and control strategy.

KW - multiport power converter

KW - energy router

KW - power flow calculation

KW - Power FPGA

UR - https://www.scopus.com/pages/publications/85054514863

U2 - 10.1109/COMPEL.2018.8460019

DO - 10.1109/COMPEL.2018.8460019

M3 - Conference Paper published in a book

AN - SCOPUS:85054514863

SN - 9781538655429

T3 - 2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018

BT - 2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018

PB - Institute of Electrical and Electronics Engineers Inc.

Y2 - 25 June 2018 through 28 June 2018

ER -

Wang P, Chen M. Towards Power FPGA: Architecture, Modeling and Control of Multiport Power Converters. In 2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018. Institute of Electrical and Electronics Engineers Inc. 2018. 8460019. (2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018). doi: 10.1109/COMPEL.2018.8460019

Towards Power FPGA: Architecture, Modeling and Control of Multiport Power Converters

Abstract

Publication series

Conference

Bibliographical note

Keywords

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this